环氧薄涂面涂地坪涂装系统
The coating system thin epoxy coating
产品功能:
环氧薄涂面涂主要功能为施工简易,表面美观平整无缝,颜色自然可选择,低成本、便于清洁、维护。常施作于一般要求性不高的地面,预防水泥素地起砂,如仓库、车库、厂房等。
一般施工法为十字滚涂法,要注意材料可使用时间、搭接面滚涂的间隔时间及选用适当的施工工具。大面积施作要预先规划搅拌时间与施工人员的互相搭配。
Product function:
Thin epoxy coated with main function is of simple construction, smooth seamless surface appearance, natural color can be choice, low cost,
easy to clean, maintain. Often appliedto the general requirements of the high ground, the prevention of cement, sand, such as warehouse,garage, workshop etc..
The general construction method of roller coating method for cross, pay attention to the material can be used time interval,
lap roll coated and selection of appropriate constructiontools. Large area construction to advance planning and construction personnel mixing with each other.
产品型号
Product Name
|
配比{A:B}
Weight
ratio
|
包装
Packaging
|
干燥
时间
Drying
time
|
耐化性能
Chemical
resistance
|
耐水性能
Water r
esistance
|
耐磨耗性
Wear
resistance
|
特性
Characteristic
|
MS-HFP-01
高固型薄涂面涂
High solid flat
top paint
|
4:1
|
A:20KG
|
良
Good
|
优
excellent
|
优
excellent
|
优
excellent
|
光泽度佳、涂膜饱满度高、低VOC,气味低,
喷涂具有仿自流平效果
High gloss,high film-thickness-sense,
low VOC,low odor,resembling self-leveing coating effect by spraying machine.
|
B:5KG
|
MS-HFP-02
高固型薄涂面涂
High solid flat
top paint
|
4:1
|
A:20KG
|
优
excellent
|
优
excellent
|
优
excellent
|
优
excellent
|
光泽度佳、涂膜饱满度高、低VOC,气味低,
喷涂具有仿自流平效果
High gloss,high film-thickness-sense,
low VOC,low odor,resembling self-leveing coating effect by spraying machine.
|
B:5KG
|
MS-EFP-01
经济型薄涂面涂
Economic flat
top paint
|
4:1
|
A:20KG
|
一般
General
|
良
Good
|
良
Good
|
一般
General
|
经济型,施工性优于 MS-HFP-01,涂膜饱满度高,
低VOC,气味低
The economy, construction of better than MS-HFP-01, the film full of high, low VOC, low odor
|
B:5KG
|
MS-RFP
橘纹薄涂面涂
Rough face low-build flat piant
|
4:1
|
A:20KG
|
良
Good
|
优
excellent
|
优
excellent
|
优
excellent
|
涂膜表面可依滚筒的型式调整不同的线纹细致效果,
低VOC,气味低
The surface of coating film fine texture effect
can be adjusted by different roller type,low VOC,low odor
|
B:5KG
|
MS-NFP
止滑薄涂面涂
Non-slip low-build top-coat resin
|
4.25:1
|
A:21.25KG
|
一般
General
|
良
Good
|
良
Good
|
优
excellent
|
带有止滑骨材,涂膜均匀具有止滑效果,低VOC,气味低。
Additional anti-slip born material inside,homogeneously coating
film with non-slip effect,low VOC,low odor
|
B:5KG
|
MS-SFP
溶剂型薄涂面涂
Solvent type low-build resin flat piant
|
4:1
|
A:20KG
|
优
excellent
|
良
Good
|
优
excellent
|
良
Good
|
溶剂型薄涂,防垂流性佳,容易施工,表面美观
Solvent type low-build resin,easily constructed,the surface outlook feel beautiful
|
B:5KG
|
使用及储存时的注意事项:
□请放置于阴凉干燥处
□若长期放置,如有分层现象,请先加以搅拌
□请按配比提取主剂、硬化剂混合
□请使用圆形容器将其搅拌均匀,避免发生硬化不完全现象
□请在可使用时间内使用完毕
□请勿在低温(<5℃)环境下施工,避免发生硬化不完全现象
□不慎沾到皮肤,用肥皂水清洗即可
Matters needing attention in use and storage:
□ Please placed in a cool and dry place.
□ If the long-term placement, such as stratification, please be stirring
□ Please according to the ratio of extraction agent, hardening agent
□ Please use the circular container to stir, to avoid the occurrence of atherosclerosis is not fully phenomenon
□ Please use after use period of time
□ Do not at low temperature (<5 C) environment construction, to avoid the occurrence ofatherosclerosis is not fully phenomenon
□ They touch the skin, wash with soap and water.
|