环氧自流平地坪涂装系统
Self leveling epoxy floor coating system
产品功能:
环氧自流平面涂主要功能为附着性好、流展性佳,高光泽度,高耐磨,高抗压强度、耐水性、耐化学药品性好、颜色自然可选择,便于清洁、维护,无VOC、无气味,对环境友好,适合于一般环氧及密闭空间操作,如仓库、车间、制药厂、无尘室、食品厂、医院等。
施工时用料不要少于0.8kg/㎡,且要注意镘涂均匀度、搭接面的间隔时间及选用适当的施工工具,必要时可搭配脱泡滚筒布均匀,大面积操作要预先规划搅拌时间与施工人员的互相搭配。
Product function:
Epoxy coated planar main function for the good adhesion, flow resistance, high gloss,high wear resistance, high compressive strength,
water resistance, chemical resistance,good natural color can choose, easy to clean, maintain, no VOC, no smell, friendly to the environment,
suitable for general epoxy and confined space operations, such as warehouse, workshop, pharmaceutical factory, food factory, clean room, hospital, etc..
Materials not less than 0.8kg/ square meters of construction, and attention should be paid to coating uniformity,
the interval time and the overlapping construction tools appropriate,when necessary, can match the deaeration roller uniform,
large area of operations toadvance planning and construction personnel mixing with each other.
产品型号
Product Name
|
配比{A:B}
Weight
ratio
|
包装
Packaging
|
干燥时间
Drying time
|
耐化性能
Chemical
resistance
|
光泽性能
Gross degree
|
防浮色性
Color floating r
esistance
|
特性
Characteristic
|
MS-ESP
经济流展型面涂
Economic self-leveing top piant
|
5:1
|
A:20KG
|
一般
General
|
一般
General
|
优
excellent
|
良
Good
|
无溶剂厚涂型,流展性佳
Solvent free high-build top coating type,excellt leveing capability
|
B:4KG
|
MS-FP-02
标准型流展面涂
Standard self-leveing top piant
|
4:1
|
A:20KG
|
良
Good
|
良
Good
|
优
excellent
|
优
excellent
|
无溶剂厚涂型,耐冲击性优,极佳的防分色浮色效果,各项物性比LF佳
Without solvent type, impact resistance,
excellent color separation floating color effects,
the physical properties than LF
|
B:5KG
|
MS-ASP-02
耐酸碱流展面涂
Anti-acid and alkali self-leveing top piant
|
5:1
|
A:20KG
|
优
excellent
|
优
excellent
|
良
Good
|
良
Good
|
耐酸碱厚涂型,高机械强度、耐化学药品性佳
Acid and alkali resistant type, high mechanical strength,
good chemical resistance
|
B:4KG
|
使用及储存时的注意事项:
□请放置于阴凉干燥处
□若长期放置,如有分层现象,请先加以搅拌
□请按配比提取主剂、硬化剂混合
□请使用圆形容器将其搅拌均匀,避免发生硬化不完全现象
□请在可使用时间内使用完毕
□请勿在低温(<5℃)环境下施工,避免发生硬化不完全现象
□不慎沾到皮肤,用肥皂水清洗即可
Matters needing attention in use and storage:
□ Please placed in a cool and dry place.
□ If the long-term placement, such as stratification, please be stirring
□ Please according to the ratio of extraction agent, hardening agent
□ Please use the circular container to stir, to avoid the occurrence of atherosclerosis is not fully phenomenon
□ Please use after use period of time
□ Do not at low temperature (<5 C) environment construction, to avoid the occurrence ofatherosclerosis is not fully phenomenon
□ They touch the skin, wash with soap and water.
|